 If you want your dog to have biggy doggy balls.
Then putting on one of these will not only remind him of the reassuring grip of his Master
around his balls, but they will hang correctly.
I only know of WildCat and Robs (see suppliers) that provide these - I an sure other
perv shops can source them. They are all HEAVY, but they come in different lengths, and
maybe stacked when you have increased the initial streach. The 2 screw option here (Robs)
ensures it is dead tight - but it a very fiddly thing to put on. GREAT care must be taken
when putting it on so as not to crush and of the ball sack when fitting it. The slave
should not be gagged.
The easiest way in fitting it that I have found, is to get both screws started, then close
and rotate the ring ensuring that there is not thing trapped, then hold it tightly toether
and screw one of the screws firmly home. This therefore means that the other version a peg
and one screw is easier to put on.
Life is much easier if the slave is fully shaved. |
Keeping the cock and balls
correctly place can also be done with binding. Securely placing the rope around his balls,
with part of the cord used to separate each ball. The remaining cord is then used to lash
down his cock, both keeping his meat firm and secure. 
