Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England
Email: enquiry@isocomoptocouplers.com
- Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055
Circuit
Features
Description
Absolute Maximum Ratings
Electrical
Characteristics
Similar Optocouplers
Home Page
High Data Rate, Typ 1 MHz (NRZ)
Microporcessor Compatible Drive
Logic
Compatible Output Sinks 16 mA at 0.4 V Max
High Isolation between Input and
Output
Guaranteed On/Off Threshold Hysteresis
High Common Mode Rejection
Ratio
Fast Switching: Typically t rise = t fall = 100 ns
Wide Supply
Voltage Capability, compatible with all popular logic systems
The IS609, H11L1 and H11L2 are optically coupled isolators consisting of a
Gallium Arsenide infrared emitting diode and a Microprocessor Compatible Schmitt
Trigger mounted in a standard 6-pin dual-in-line package. Surface Mount Option Available.
All electrical parameters are 100% tested. Specifications are guaranteed to
a cumulative 0.65% AQL.
Absolute Maximum Ratings: (Ta=25°C) | |
| Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: |
-55°C to +150°C -55°C to +100°C 260°C for 10s, 1.6mm from case ±1500V |
Input Diode | |
| Forward DC Current: Reverse DC Voltage: Peak Forward Current: Power Dissipation: Derate Linearly: |
60mA 6V 0.5A (1µs p.w. 300pps) 100mW 1.33mW/°C above 25°C |
Output Transistor | |
| V45 Allowed Range: V65 Allowed Range: I4 Output Current: Power Dissipation: Derate Linearly: |
0 to 16V 0 to 16V 50mA 150mW 2.00mW/°C above 25°C |
Package | |
| Total Power Dissipation: Derate Linearly: |
250mW 3.3mW/°C above 25°C |
| INPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VF | Forward Voltage | IF=0.3mA | 0.75 | V | ||
| IF=10mA | 1.5 | V | ||||
| IR | Reverse Current | VR=3.0V | 10 | µA | ||
| VR | Reverse Breakdown Voltage | IR=10µA | 3.0 | V | ||
| OUTPUT | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| VCC | Operating Voltage Range | 3 | 15 | V | ||
| I6 OFF | Supply Current | IF=0, VCC=5V | 5.0 | mA | ||
| IOH | Output Current High | IF=0, VCC=VO=15V | 100 | µA | ||
| COUPLED | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
| I6 ON | Supply Current | IF=5mA, VCC=5V | 5.0 | mA | ||
| VOL | Output Voltage Low | RL=270ohm, VCC=5V | 0.4 | V | ||
| IF ON | Turn-On Threshold Current | |||||
| IS609 | 1.6 | mA | ||||
| H11L1 | 1.6 | mA | ||||
| H11L2 | 10 | mA | ||||
| IF OFF | Turn-Off Threshold Current | 0.3 | 0.9 | mA | ||
| IF OFF/IF ON | Hysteresis Ratio | 0.50 | 0.90 | |||
| tON | Turn-on Time | RE=1200ohm | 0.57 | µs | ||
| tF | Fall Time | C=270pF | 0.09 | µs | ||
| tOFF | Turn-off Time | f<=100kHz | 1.40 | µs | ||
| tR | Rise Time | tP=1µs | 0.05 | µs | ||
Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date.